| |
MODEL 1190
THERMAL VACCUM CHAMBER CONNECTOR
 |
The Model 1190 Connector is designed
for use as an electrical feed through in Vacuum Chambers. It has
three mating connector components, a plug with pin contacts, a hermetic
feed through, and a receptacle with socket contacts. The plug and
receptacle contacts are Standard MIL-C-39029 20 gage removable crimp
contacts. When not connected to the hermetic feed through the plug
and receptacle are able to push-to-mate to each other for use out
of vacuum chamber. The plug and receptacle provide push-to-mate
mechanical locks when mated to the feed through and to each other.
The plug and receptacle each have lanyards that are used to disconnect
from the feed through and each other. The design is optimized for
minimal spacing when connectors are mounted adjacent to one another.
Plug and Receptacle accepts standard M/S backshells and strain relief. |
| MECHANICAL PERFOMANCE: |
Connector Un-mate Force
Plug, 100 lb max.
Receptacle, 100 lb max.
Leak Rate, Hermetic Feed-Through
1 X 10-8 cc/sec
Operating Temperature Range
302° F to -65° F or 150° C to -54° C
|
| CONTACT ARRANGEMENT: |
150 ea. # 20 gauge contacts |
| ELECTRICAL PERFORMANCE: |
Dielectric Withstanding Voltage
1 mA max. @ 50 VAC
Insulation Resistance
50 megohms min. @ 50 VDC
Shell-to-Shell Conductivity
.075 ohms @ 1 ampere
- Plug to Feed-Through Mounting Flange
- Receptacle to Feed-Through Mounting Flange
- Plug to Receptacle
|
| |
